Should you decide to shorten them, these strips can be cut every 4 or 2-Inches respectively. The standard density option has 15 LEDs and the high density strip has 30 LEDs. Length: We use a 20-Inch length piece of strip for each kit. The R G B color option needs a controller that provides over 15 different color choices and features like: flash, strobe, fade and smooth. However, the cooler color (6000K) are more vibrant and slightly brighter, so they get used often in outdoor applications and work areas where extra light is needed. The warmer-white (3000K & 4000K) color is similar in hue to an incandescent and provides a more gentle light, which we see requested a lot for applications in the home. The standard density has 30 LEDs per meter and the high density has 60 LEDs per meter.Ĭolor Options: The 5050 SMD LEDs inside the strips are available in three different white color temperatures and RGB. There are two variations of this strip, a standard density and high density. The beginning of each strip includes a 6-Inch long 2.1mm female power plug that connects to either the dimmer or the battery holder, as described earlier. The sections of strip are 20-Inches long and flexible enough to bend and stick around curves.
On the bottom side of the strip is a double-sided thermal 3M tape for easily mounting them to a surface. They are sealed in a protective clear silicone epoxy making them durable and waterproof (IP65 rated). The strips, again, require 12V dc, but lets talk about the other characteristics and features that make these the ideal choice. Now that power is solved, lets talk about… Battery powered LED light strips
#Battery led strip lights full
However, these run times are based on the LEDs operating at full power, but many of you, like me, will add the option for dimming, which means you can run the strips at a lower output and get more run time. The LEDs never completely went out, but did get dim enough after that amount of time that they wouldn’t be useful without recharging or replacing. The respective run time from 8AA Duracell batteries is 30+ and 15+ hours. The strips options, which we also will go over in more detail later, come in either standard or high density. Run Time: 8AA batteries provide lots of juice and ran these strips much longer than we expected, but because we offer two different output LED strips the run time will vary depending on which one you choose. It can be used with standard AA batteries or rechargeable batteries, and is completely enclosed with double-sided mounting tape on one side with a 6-inch long male 2.1mm power plug that can be quickly disconnected from the strips or dimmer (more on dimming options later). This battery holder measures 4.76” (L) x 2.31” (W) x 0.65” (H) and includes an on/off switch.
Kit component 1: 8AA Battery Holder with Switchīattery Holder: So, we power the LED strips with AA batteries inside a 8AA Battery Holder.
0 kommentar(er)
